KK uses wet casting in the manufacture of all kerb stones
KK products provide consistent long term performance
All kerb stones are made from concrete mix design with a minimum 28 day compressive strength of 30MPa (also known as M30)
Tapered Kerb Stone
KS-01 (300x250x100)
KS-01a (900x250x100)
KS-02 (500x300x125)
KS-03 (250x300x125)
KS-04 (500x315x150)
KS-05 (300x300x150)
KS-05a (900x300x150)
KS-06 (400x375x200)
KS-07 (900x250x150)
KS-08 (300x250x150)
KS-08a (600x300x125)
KS-18 (600x250x100)
KS-22 (300x250x150)
KS-23 (150x250x150)
Rounded Kerb Stone
KS-09 (300x300x150)
KS-09a (900x300x150)
KS-10 (500x250x100)
KS-11 (450x300x100)
KS-12 (450x225x75)
KS-13 (300x350x75)
KS-20 (600x150x150)
KS-14 (300x450x150)
Garden Kerb
KS-17 (500x225x50)
Long Kerb Stone/Car Stopper
KS 1800X150 HeightX150/200 - Wheel Stopper
Overall Dimensions: 1800 mm Length X 150 mm Height X 150 mm Top Width / 200 mm Bottom Width
Manufactured by using M-30 grade of concrete using vibro-compaction process using jointless moulds
Reinforced with 4 Nos of 8 mm dia Tor Steel & 6 mm dia Stirrup @ 150 mm c/c along the length
Provided with a slot of 600 X 75 mm in the centre & at bottom for water drainage & 2 holes of 20 mm dia through out the depth of kerb for fixing the nails for the purpose of anchoring the kerb to the ground.(NOTE: COST OF NAILS NOT INCLUDED)
KS 1800X200 HeightX150/200 - Wheel Stopper
Overall Dimensions: 1800 mm Length X 200 mm Height X 150 mm Top Width / 200 mm Bottom Width
Manufactured by using M-30 grade of concrete using vibro-compaction process using jointless moulds
Reinforced with 4 Nos of 8 mm dia Tor Steel & 6 mm dia Stirrup @ 150 mm c/c along the length
Provided with a slot of 600 X 75 mm in the centre & at bottom for water drainage & 2 holes of 20 mm dia through out the depth of kerb for fixing the nails for the purpose of anchoring the kerb to the ground.(NOTE: COST OF NAILS NOT INCLUDED)
Triangular Wheel Stopper
Overall Dimensions: 2500mm (Base Length) X 125mm (side of equilateral triangle)
Manufactured by using M-30 grade of concrete by vibro compaction process using jointless moulds
Suitably Reinforced
Provided with 2 holes of 20 mm dia throughout the depth of the kerb for fixing the nails for the purpose of anchoring the kerb to the ground
